The Chromatic Endpin Technical Info

Endpin Technical Information

All necessary nuts and screws are included. 

Our 1/2" version works with the very popular (and excellent!) New Harmony Endpin fittings. 

1/2" and 12mm rods are 6.75 inches in length from end to end. 

10mm rods are 10 inches in length from end to end. 

You will need a 5/32" Hex Wrench and a 14mm Box Wrench to adjust the endpin. Available here. 

Not recommended for basses over 30lbs. The Chromatic Endpin works with most endpin mechanisms that lock the endpin in place with a set screw style mechanism. Some "clutch" style mechanisms do not grip the endpin sufficiently to use The Chromatic Endpin. 

International Customers based outside of the United States may have to pay additional import taxes.